Heavy-duty ZL-H380 series steering wheel

Description: Rated bearing capacity of 3 tons, wide wheel surface, large wheel diameter, good smoothness and strong obstacle-crossing ability, parallel planetary reduction transmission structure, high transmission efficiency, strong bearing capacity, and large speed ratio and driving traction.

Product number:

Category: Heavy-duty Drive Wheel Series

隐藏域元素占位

Message

Back to list

Product description

Heavy-duty drive wheels have the following advantages over non-heavy-duty drive wheels:

1. More stable traction: Heavy-duty driving wheels are usually equipped with larger brakes and high-strength gears, which enable them to provide stronger traction to cope with complex road conditions such as heavy loads and slopes.

2. Higher load-bearing capacity: Due to its special design, the heavy-duty drive wheel can bear heavier on-board loads. They typically feature more durable hubs, bearings, reducers and other components to provide more consistent service and longer life.

3. Less wear and friction: The use of heavy-duty drive wheels can distribute the driving force to more wheels, thereby reducing wear and friction between the tires and the ground, and reducing the possibility of the handling vehicle under heavy load. Suspension, brakes, steering and other issues.

Technical Parameter
Model	ZL-H380
Gearbox	Level 1-3 planetary
Speed ratio	I	7-120
Wheel diameter	mm	200
Fastest speed	m/min	20-200
Temperature	℃	-10 to +55
Weight	KG	about 70
Traction motor technical parameter
Motor type	Servo / Brushless
Rated power	W	1000 - 3000
Rated voltage	V	DC24-110V / AC220-380V
Rated speed	rpm/min	3000
Rated torque	N.m	3.18 - 9.68
Steering motor technical parameter
Motor type	Servo / Brushless
Rated power	W	750 - 1000
Rated voltage	V	DC24-110V / AC220-380V
Rated speed	rpm/min	3000
Rated torque	N.m	2.39 - 3.18
Steering reducer speed ratio	I	35-120